Midwest Motorsports built the cylinder head and provided the custom camshaft and pistons. Moss has been selling Robbins tops for years and they are probably the best top available, now that Coventry the OEM has stopped making them. Once you know what top to order, be sure to order a new header seal. There are three types of bows. Showing of Products. How easy is this top to install? This will take a DOT snap and connect to the stud at the top of the windshield post.
The MG Experience
I am sure with these photos you should have no problem. Spray adhesive is faster to use, but you can also make a bigger mess if you have not used it before. I measured the distance between mounting points on the second bow not the same as the first , transferred them to the rear cockpit surround, centered and stapled the straps. Once we were satisfied with the fit of the top, we folded the excess material underneath the header seal channel area. Don't forget to clean and paint the anchor bar as well, if it needs it. Then remove the top from the header rail.
MG Midget Performance Exhaust Systems | Mufflers, Headers, Tips
Thanks Juan for your help! Keep careful track of where the attachment hardware was located and where and how the top was folded under the header rail, header seal and in the corners. Anything other than the stock manifold will require modification of your new exhaust system, but it should be cheap and easy to do. Sign In with Facebook. Pick up a small roll of " masking paper, or newspapers, and a roll of masking tape. You have no obligation to purchase the product once you know the price. That is completley up to you.
Let it dry completely. If you still have a top on the car, check it for operation. Do these parts fit your vehicle? Yes, its kind of scary having all that tension on two little screws. Our tops do not require cutting or sewing and will arrive ready for installation.